Product Overview
Calomi Liquid Stone is a two-component epoxy seamless floor material. Made of eco-friendly low-odor epoxy resin and resin sand, it forms an integrated, seamless and transparent original stone surface after construction and curing. Featuring excellent compression resistance, wear resistance, waterproof and moisture-proof performance, as well as easy maintenance, it presents a luxurious and high-end decorative effect, ideal for various high-end indoor seamless floor decorations.
Main Ingredients
Eco-friendly low-odor epoxy resin, professional curing agent, resin sand, eco-friendly functional additives.
Product Advantages
1. Seamless integral forming: Integral paving and curing without splicing gaps, effectively preventing dust and dirt accumulation for easy daily cleaning.
2. Transparent original stone texture: Pre-mixed resin sand with fine and uniform texture and rich colors delivers a smooth, warm and superior light luxury stone finish.
3. High strength and durability: Dense and hard structure after curing, scratch-resistant, pressure-resistant, non-shedding and crack-proof with a long service life.
4. Waterproof, moisture and mildew resistant: The fully enclosed seamless structure blocks water vapor penetration effectively, suitable for humid indoor environments.
5. Eco-friendly and low odor: Adopts low-odor environmental formula, non-toxic and odorless after curing, safe and healthy for all kinds of enclosed indoor spaces.
Application Scope
This product is a professional seamless floor material exclusively for indoor use. It is only applicable to indoor floor decoration, not for wall construction. Outdoor application is not recommended.
Application scenarios: whole-house indoor floors, villa floors, hotel lobbies, exhibition halls, shops, offices, clubs, kitchen and bathroom floors and other high-end indoor seamless floor spaces.
Note: This product has ordinary weather resistance and is prone to yellowing and aging when used outdoors. Indoor construction is highly recommended.
Reference Coverage
1.5–2kg/㎡ (approximately 1mm thickness, floor use only)
Note: The actual consumption varies slightly according to base flatness and construction thickness.
Packaging Specification
11kg/bucket (Two-component ratio: 10:1)
Construction Tools
Mixing tool, self-leveling scraper, defoaming roller
Construction Conditions
1. Working environment: Temperature ≥5℃, humidity ≤85% with good ventilation. Construction is strictly prohibited in low-temperature and humid conditions.
2. Substrate requirement: The surface must be flat, solid, dry, crack-free, hollow-free, oil-free and dust-free, with moisture content ≤9% and PH value ≤10.
Construction Process
1. Fully polish and clean the substrate to remove dust, oil and sundries, ensuring the base is flat, firm, clean and free of cracks and hollows.
2. Stir component A and component B thoroughly and evenly at a ratio of 10:1.
3. Spread the mixed material evenly on the floor, level and control the thickness with a self-leveling scraper for one-time integral forming.
4. Roll the surface with a defoaming roller immediately after paving to eliminate bubbles and pinholes for a flat and transparent finish.
5. Initial curing is completed within 24 hours under normal environment, and the floor can be put into normal use after 7 days of full curing.
Construction Precautions
1. Construction in low-temperature and humid environments is prohibited, which may cause slow curing, surface stickiness, wrinkling and other defects. Construction should be carried out in dry and suitable weather.
2. This product is only suitable for indoor floor construction. Outdoor use is not recommended, as long-term UV exposure will cause yellowing and aging.
3. Keep dust protection during construction to avoid surface contamination by dust and sundries. Do not step on, accumulate water or collide with the surface before full curing.
Storage & Shelf Life
– Storage: Store in a sealed, cool, dry, ventilated and dark environment at 0–35℃
– Shelf life: 18 months for unopened sealed products